The CTET score calculator estimates your Paper I or Paper II marks from the number of correct, wrong and unattempted answers. Under the CTET September 2026 marking rule, each correct answer adds 1 mark. A wrong or unattempted answer adds 0 and deducts 0 because there is no negative marking. Your estimated score is therefore the same as your correct-answer count, out of 150.
Quick example: 103 correct, 31 wrong and 16 unattempted answers total 150. The estimated score is 103/150, the percentage is 68.67%, and the score is 13 marks above the displayed 90/150 benchmark. This is an estimate, not a CBSE result or a recruitment decision.
Source checked: 22 August 2026. The marking rule and benchmark come from the CTET September 2026 Information Bulletin. No September 2026 provisional answer key, final answer key or result had been confirmed on the checked date. No exact check time is claimed.
CTET score calculator at a glance
The calculator does not need subject-wise marks to produce the total. It needs three response counts that add up to 150. It also asks which paper you are checking so the result stays attached to the correct teaching level. Category context supplies a policy note, but it does not silently replace the displayed 90-mark benchmark with an unsupported lower number.
How to use the CTET score calculator
- Choose Paper I or Paper II. Use a separate calculation if you appeared for both papers.
- Identify the answer source you are using. It may be an unofficial coaching key, CBSE's provisional key, or CBSE's final answer position. The source affects how much confidence you should place in the estimate.
- Count the responses where your recorded option matches the answer in that key. Enter this number as correct.
- Count attempted responses that do not match the key. Enter this number as wrong.
- Enter the questions you did not answer as unattempted. The tool may derive this as
150 - correct - wrong. - Confirm that correct, wrong and unattempted add up to 150, then calculate.
- Read the score, percentage, comparison with 90 and the source limitation together. Do not copy only the benchmark label.
The calculation is:
estimated score = correct answers x 1 estimated percentage = estimated score / 150 x 100 benchmark difference = estimated score - 90
The tool accepts whole response counts from 0 to 150. It should reject negative numbers, fractions, empty or non-finite values, and any set of counts that totals less or more than 150. If the total is wrong, recheck the response sheet before interpreting the score.
Why wrong answers do not reduce the CTET score
The CTET September 2026 Information Bulletin awards 1 mark for each correct answer and states that there is no negative marking. That produces a simple response table:
Suppose two candidates both have 80 correct answers. One has 50 wrong and 20 unattempted, while the other has 20 wrong and 50 unattempted. Each estimated score is 80/150 because neither wrong nor unattempted responses attract a deduction. The calculator still records all three counts to verify that the paper total is 150 and to help the candidate review accuracy.
No negative marking does not mean a wrong answer becomes correct or earns a mark. It means the wrong response contributes zero instead of subtracting from the marks already earned. An unattempted response also contributes zero.
Correct, wrong and unattempted answers
A correct answer is a recorded response that matches the answer in the key being used. Match the paper, language, question identifier and set details shown in the official files. A memory-based question list or a mismatched booklet sequence can make a count unreliable even when the arithmetic is right.
A wrong answer is an attempted response that does not match that key. It deducts no mark under the current CTET rule. If CBSE changes an answer after reviewing objections, a response may move between correct and wrong when you recalculate.
An unattempted answer is a question for which no response was recorded. If you know the correct and wrong counts, the tool can derive it by subtracting both from 150. For example, 150 - 103 - 31 = 16 unattempted.
Keep the counts tied to one source. Do not take the correct count from a provisional key and the wrong count from a revised final key. Recount the whole paper when the authority changes an answer.
Paper I and Paper II are calculated separately
Paper I relates to teaching eligibility for Classes I-V. Paper II relates to Classes VI-VIII. Both papers have 150 multiple-choice questions for 150 marks, use the same +1 and no-negative-marking rule, and have the same displayed 90/150 benchmark. Their subject structures and teaching levels differ.
If you appeared for both papers, run the calculator twice. Do not add the marks into one 300-mark score and compare that combined number with 90. A candidate with 95 in Paper I and 85 in Paper II has one estimate above the displayed benchmark and one below it. The stronger paper does not fill a shortfall in the other.
Use the CTET exam pattern guide for the Paper I and Paper II section structure. The calculator only handles the total response count for the selected paper.
Worked example: 103 correct, 31 wrong and 16 unattempted
The example totals exactly 150 responses:
103 + 31 + 16 = 150
Only the 103 correct answers add marks. The 31 wrong answers and 16 unattempted answers deduct nothing.
The careful reading is: Meets the displayed 60% CTET benchmark and is 13 marks above 90. It should not be rewritten as officially qualified, guaranteed qualified or guaranteed selection. If the 103 count came from a provisional key, it can change after CBSE reviews challenges. If it came from a final key, it is still an estimate until CBSE publishes the candidate's result.
What 90 out of 150 means
The Information Bulletin says a person who scores 60% or more in the TET examination will be considered TET pass. Each CTET paper has 150 marks, so the direct conversion is:
150 x 60 / 100 = 90
The calculator displays three score bands derived from that benchmark. They describe only the relationship between an estimated mark and 90.
These bands are not a percentile, rank, recruitment cutoff or job-probability scale. They do not label a score as excellent, safe or competitive for a vacancy. A recruiting body may treat CTET as qualifying only or may apply other lawful rules described in its notice. This calculator has no vacancy, applicant, shortlisting or document-verification data, so it cannot estimate selection.
Read the full benchmark explanation on CTET qualifying marks 2026.
Category policy and concession limits
The displayed benchmark stays at 90/150 when a user selects the reserved-category, PwD or policy context. The bulletin says school managements may consider concessions for SC, ST, OBC, differently abled persons and other categories under their existing reservation policy. It does not publish one universal CTET cutoff of 55%, 82 marks or 82.5 marks for everyone in those groups.
The word may places the question with the relevant management or authority and its valid policy. Category selection alone cannot prove that a concession applies, identify the required score or decide how a percentage is rounded. A relaxation in the educational qualification for appearing in CTET is also a different rule. It does not automatically reduce the score benchmark.
For this reason, a below-90 estimate should remain labelled Below the displayed 60% CTET benchmark. The next step is to check the exact policy for the school management or recruitment concerned, not to replace 90 with a generic category number found on another website.
Provisional key, final key and official result
The number produced by the calculator is only as current as the answer source behind it.
No CTET September 2026 provisional key, scanned OMR or response-sheet schedule, challenge window, final-key date or final-key URL had been confirmed when the official sources were checked on 22 August 2026. The CTET answer-key page owns that release status and will link the official material after verification.
A provisional-key score can move in either direction if an accepted answer changes. Recalculate from the complete updated key rather than adjusting one remembered number. Even a final-key estimate may differ from the result if the response match, question treatment or personal count was wrong.
What the calculator result cannot prove
The calculator cannot read CBSE's evaluation record or authenticated candidate data. It cannot confirm that your response count matches the official OMR, decide an objection, apply an unknown concession, issue a qualifying certificate or declare the result.
It also cannot predict teacher recruitment. CTET qualification is an eligibility condition, not a right to recruitment or appointment. A separate authority controls vacancies, educational qualifications, reservation, age rules where applicable, subject requirements, shortlisting, selection and document verification.
The official result remains the authority for final marks. CBSE says the September 2026 result is tentatively expected by the end of October 2026, but no exact date, time or September-specific result link was confirmed on 22 August. Check the CTET result status page rather than treating an estimate as a scorecard.
Calculator disclaimer: This is an estimate based on the answers entered and the current CTET marking rule. Final marks, answer-key decisions, applicable concessions, and certificate status are determined by CBSE and the relevant authority.
What to do after calculating your score
- Save the paper name, answer-key source and response counts with the estimate. A number without its source is hard to audit later.
- If you used an unofficial key, compare it with CBSE's provisional key after release. Do not submit an objection through an unofficial site.
- If you used the provisional key, read the official challenge notice for the deadline, fee and evidence rules. Those September details were not announced on the source-check date.
- Recalculate after CBSE publishes its final answer position or any scoring instruction.
- Compare the estimate with CTET qualifying marks and category rules, keeping any authority-specific concession separate.
- Use the official CTET result guide when CBSE releases the scorecard. The result should replace the estimate in later decisions.
- After the official result, read what to do after CTET for certificate, recruitment and teacher-education pathway context. None of those outcomes can be inferred from the calculator alone.
Return to the CTET 2026 overview for current cycle links and status.
Official sources and limits
- CTET September 2026 Information Bulletin, published by the Central Board of Secondary Education. Used for 150 questions and marks in each paper, +1 for a correct answer, no negative marking, the 60% benchmark, management-policy concession wording and recruitment limits.
- Official CTET homepage, checked 22 August 2026. Used for official navigation and current public release status.
- Official CTET public-notices index, checked 22 August 2026. A newer CBSE notice can supersede the status described here.
- Official CBSE results hub, checked 22 August 2026. Used as an official results destination. No September 2026 CTET result URL was available on the checked date.
Search snippets, coaching keys and competing education sites were not used as evidence for the marking rule, benchmark, category cutoff, answer-key release or result status.